Post Tensioning Equipment  

FEATURES

 

• High tensile alloy steel material

• Safety pressure relief valve to prevent accidental over-pressurisation

• Front gripping wedge design minimise strand usage

• Small diameter detachable front nose extension to fit into confined spaces (suitable for 12.7mm & 15.2mm strands

• Externally plated to minimize corrosion

• Quick release coupling ensures faster connection

FEATURES

 

• Light weight and compact design

• Universal Motor, starts under full load and is available in 240VAC 50/60HZ

• 3.1 mt 24 pendant control

• External pressure adjustment is available

• Designed for intermittent duty operation

• Gauge port on control valve

• PE55 series

• Capacity: 1 1/8Hp

FEATURES

 

• Maximum working pressure: 1000bar/14500psi

• SS316 Stainless steel case & measuring system

• Rugged construction

• Liquid filled

• Standard followed in general:

       EN 837-1

  • Brass Mechanism

  • Brass Connection

• Over Pressure Limit

  • 130% of F.S.P > 100Bar

  • 115% of F.S.P > 100Bar​​

SPECIFICATION

 DN6 HIGH PRESSURE THERMOPLASTIC           HYDRAULIC 
TWIN HOSE WITH RUBBER GUARD

 

• Design: Inner tube of polyamide (PA), 2 spiral layers of high tensile steel wire, 2 open spiral synthetic fibre, outer sheath of polyurethane (PUR)

• ID x OD: 6.3 x 12.4 (mm)

• Maximum working pressure: 700bar

• Minimum burst pressure: 1860bar

• Minimum bending radius: 70mm

• Weight: 190g/m

• Temperature range: -40°C to 100°C

​

  Mobile Interface
  •   NFC* enabled phones
  •   Read function
  •   Off-line
  •  Quick on-site safety check
  •   Download app from 
www.cejn.com/cis

SPECIFICATION

Parker's JK hose is a hydraulic industry standard jack hose that has a pressure range of 10000-10500 PSI, with exceptional hydraulic fluid compatibility.  The JK hose is designed, built, and tested for high performance, easily supporting the rigors of high tonnage hydraulic jack applications. Sizes range from ¼” to 3/8” in diameter to fit the requirements of various markets.

Markets:
• Construction
• Utility Equipment
Features/Benefits:
• No-Skive design eliminates the need to remove hose cover before crimping
• 10000-10500 PSI working pressure in different sizes
• Engineered inner tube provides exceptional hydraulic fluid compatibility
Industry Specifications:
• ISO 1436-1 Type 2SN / SAE J517 100R2AT / EN 853 Type 2SN / NFPA 1936 / EES 116-4
Applications:
• Petroleum base hydraulic fluids and lubricating oils